Welders

Features:

• Includes: Comfortable 8' H-9B gun with liner for 0.023-.035" wire, 0.030" contact tips, 10" work cable with clamp, sample spool of 0.030" self-shielding flux cored wire, spool shaft to accommodate 4" spools and a power cord with plug
• Applications: Farm/Ranch, Light Maintenance and Repair Light Fabrication
• Welds 20 gauge up to 3/16" steel with flux cored wire
• Proven built-in wire feeder with quick-release drive roll tension lever
• Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
• Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness
• Dual groove drive rolls make it easy to switch between 0.023/0.025" and 0.030 -0.035" wire
• Self-resetting thermal overload and motor protection
• Optional MIG Gas Conversion Kit for the Handler 125 Wire-Feed Welder includes dual-gauge adjustable regulator, 5' gas hose, solenoid gas valve with internal gas connections, 3 contact tips- 0.024", 2 lbs solid 0.024" ER70S-6 wire and complete installation instructions

Specifications:

• Rated Output at 20% Duty Cycle: 90 A at 19 VDC and 63 A at 21 VDC (CSA Rating)
• Current Range: 30-125 A
• Max. Open-Circuit Voltage: 29 V
• Wire Feed Speed Range: 0-415 IPM and 0-500 IPM at no load
• Use C-25 gas (75% argon/25% CO2) on 22 gauge - 1/8" steel for a cleaner weld with less spatter
• Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel
• Power: CV, DC, 1 Phase
• Processes: Flux Cored (FCAW), MIG (GMAW)
• Material Thickness Welds 20 gauge up to 3/16"
• Skill Level: Low

Manufacturer Warranty: 5 years

Handler_125

Hobart Welders' Warranty