Ready Welder 10000-CS - RWII Model #10000-CS Battery Operated MIG Gun with Cold Safety Switch


Enlarge Image		Ready Welder 10000-CS - RWII Model #10000-CS Battery Operated MIG Gun with Cold Safety Switch This Product Has Not Yet Been Reviewed - Write A Review FREE SHIPPING!! The RWII Model #10000CS is cabled primarily for battery operation. This model will also connect to all CV (constant voltage) and DC (direct current) output machines. The ground cable is attached to the red dual quick disconnect connectors... (See Full Description) OUR PRICE: $654.00 Original Price: $684.00 You Save: $30.00 (4%) SKU #RWD1002 Seen this item for less? Usually ships within 24 to 48 hours

Questions? Call us anytime at (866) 513-1447

Quantity:

Six years went into the research and development of the Ready Welder Models. Alpha and Beta testing was performed on the Ready Welder models for over two years and the models have been commercially sold for more than eight years. It's Patented wire... More on Ready Welder...

Ready Welder 10000-CS - RWII Model #10000-CS Battery Operated MIG Gun with Cold Safety Switch

The RWII Model #10000CS is cabled primarily for battery operation. This model will also connect to all CV (constant voltage) and DC (direct current) output machines. The ground cable is attached to the red dual quick disconnect connectors. This makes welding jobs in remote locations easy, quick, and portable. This model will run off any or all: 18, 24 & 36 volt batteries in a parallel series depending on the application and material to be welded. The Model #10000CS features the Cold Trigger Switch. With this feature, the Ready Welder, even when connected to a power source, will not light up an arc when the trigger is released. Without this, if the electrode wire is accidentally left protruding from a gun while still connected to a power source, and comes in contact with a metal which happens to be grounded, (key word is "grounded") an arc would be struck, with possible dangerous results. When the trigger is released the guns in this model series go cold. The Model #10000CS has a two year 100% parts and labor limited factory warranty.

Comes with Ready Welder II Case which includes:

RWII High-Impact MIG gun

Ten feet of cable

One spool of flux core wire

300 amp ground clamp

Two battery clamps

Extra tips and gas hose fitting

Ten extra feet of gas hose

Foam lined blow-molded tough briefcase

Process:

Features:

Cold Switch assembly
Connects to batteries:
- 18 Volt battery can do thin sheet metal
- 24 Volt will single pass 1/2" @ 275 amp
- 36 Volt will weld up to 3/4" @ 350 to 400 amp
Connects to MIG/Constant voltage output welders
Welds steel, stainless steel and aluminum or any metals where standard one or two pound spools are available
Uses wire sizes from .023 to .045 without changing rollers
Wire speeds of 50 Inches to 900 Inches per minute
Uses heavy-duty TWECO quality front end consumables
Polarity indicator lights
Built-in gas valve
Ground cable attached
Ten foot cable with Quick Disconnects
Dimensions: 18" H X 24" W X 8" D
Net Weight: 20 lbs